Oricom Babysense 7 Sleep Apneoa Alarm

Babysense 7 Sleep Apnoea Alarm

The Babysense 7 by Oricom enables parents to sleep peacefully and protect your baby with this Infant Respiratory and Sound Monitor Package.

Babysense 7 is intended for use as an Infant Apnoea Alarm.

This is the ONLY true EARLY WARNING System available on the market that alerts you when the breathing rate lowers under 10 breaths per minute. This provides you with an early alert before it’s too late so that you have time to take action. Movement monitors only let you know after the baby stops breathing.

The Oricom BabySense 7 is a registered medical device in Australia which means that depending on your health insurance policy, you may be able to claim part or all the cost in your insurance.

Oricom BabySense 7 is a very intelligent device that watches baby’s movements and breathing in the mattress while they sleep. It is an intelligent baby monitor which will help parents to “keep an eye” on baby and allow intervention in very dangerous situations.

You need to view  as athis breathing monitor as a safety measure which when combined with “Safe Sleeping” techniques (resting on the back, not overheating of baby’s room, not smoking around the baby), offers safety and peace of mind. It signals if baby halts breathing while asleep. It is ideal for infants up to one year of age.

Key Features:

It comes with two sensors which are positioned underneath the mattress:

* Cover total crib area

* No contact with baby.

* It runs using regular houshold batteries for safety.

* It has a compact, user friendly design and Easy to use.

Oricom Babysense alerts you with the alarm if baby’s breathing becomes abnormally slow or if breathing and motion halt. These might be signs and symptoms of Central Apnea, that is one among the causes of Infant Crib Death (S.I.D.S).

Babysense may also notify when these types of signs suggest a cold, high fever, or any other sickness.

Babysense7 is included as a medical device on the Australian Register of Therapeutic Goods (ARTG No. 97479).

How It Operates: BABYSENSE 7 consists of two sensor sections that fit securely underneath the mattress. No part of the device ever comes in immediate contact with the child. The sensors are attached to a little battery powered control unit which may be attached to the side of the baby’s cot or bassinet, or positioned on a close flat work surface.

Be cautious about other monitors which feature large sensors which may not fit right into a bassinet. A low battery indicator lights up as well as an clear click is heard whenever battery power requires replacing.

BABYSENSE 7 continually monitors your baby’s breathing movements. Each breath brings about a green light to flash. When the baby halts breathing movements for longer than 20 seconds or when the breath rate lowers below 10 breaths per minute, a loud alarm is sounded.

Each Babysense 7 Kit you purchase includes:

• 1 Babysense 7 Breathing Monitor, with 85Db Alarm at 1m.
• 24 Toll free Help-line (within Australia only).
• 30 Day money back guarantee on whole package.
• 2 Year manufacturer’s warranty on Breathing Monitor and Audio Monitor.

The New Oricom Babysense 7 boasts a redesigned compact styling with the same reliable operation as the original Babysense 2.

Babysense7 is intended for use as an Infant Apnoea Alarm.
* ALWAYS READ THE LABEL AND USER GUIDE, USE ONLY AS DIRECTED

FAQ for Oricom Babysense 7

Q. Is it a medical device?
A. Babysense 7 is included as a medical device on the Australian Register of Therapeutic goods (ARTG No. 97479).

Q. Is it simple to set up and easy to use?
A. Yes, extremely simple to set up and operate, however we strongly recommend the user guide instructions be followed and functionality regularly tested.

Q. Is it portable?
A. Yes, it uses 4 x AA Alkaline batteries (not supplied) so you can move it easily.

Q. I’ve read that the Babysense7 monitor runs on batteries. How long (on average) will the batteries normally last before needing to change them?
A. The babysense7 is Powered by 4 x AA, 1.5-volt Alkaline batteries (not supplied). Power consumption is approximately 1mA. Battery life is approximately 6 months using high quality alkaline batteries.

Q. Can it be used in cribs, bassinets, travel cot?
A. Yes, as long as the base is rigid and a suitable mattress is used and you must ensure that excess cords are secured under the mattress out of reach of baby or other infants. Modifications may be required to the bassinet for sensor pad wiring access and controller unit placement. For further advice please consult an Oricom Representative.

Q. How many sensor pads does it have?
A. It comes with two highly sensitive sensor pads that cover the area of a standard sized crib or cot.

Q. What age groups is it suitable for?
A. It is suitable for healthy infants up to one year (12months) of age (it cannot be used for children or adults).

Q. If I have twins, can I use with both babies in one cot?
A. No you will need to have babies in separate cots, each with its own Babysense7 monitor.

Q. Lights on Control unit do not illuminate when turned ON?
A. Batteries are not inserted incorrectly or may be flat. Check batteries are inserted in the Control unit observing the correct polarity. Control unit requires 4 x AA 1.5V Alkaline batteries (not supplied).

Q. Low battery voltage warning (red light) on the Control Unit is flashing?
A. Batteries are low, replace all 4 batteries.

Q. Alarm goes off after a few hours
A. The mattress is not touching the sensor pads.
The mattress is raised (there is an object near the sensor pads).
Two sensor pads are connected but the baby is not yet crawling.
Only one sensor pad is connected and the baby has crawled off the sensor pad.
The mattress does not enable adequate transfer of baby movement – The compositions of some cot mattresses may not conduct vibrations associated with babies breathing movement and may not be suitable with Babaysense7.
Do not use Babysense7 with a memory foam mattress.
Make sure that the mattress and sensor pads are touching.
Make sure that there are no objects next to the sensor pads.
Connect sensor pads as per the user manual. If baby is not yet able to crawl, use only one sensor pad – and make sure sensor is placed underneath baby’s location in bed to ensure greater relative sensitivity.
Place a sheet of plywood (not supplied) under the sensor pad so that the sensor pad and the mattress will be tightly pressed together.

Q. Delayed alarms while taking the baby out of the bed
A. Performance test is not correct.
Do not conduct performance test by taking the baby out of bed and waiting for the alarm to go off. Kindly conduct performance test according to the performance test instruction in user guide.
The alarm does not go off within 20 seconds when performing the correct performance test
Environmental Influences detected by the sensor pads, such as wind, fan, air-conditioner, toy mobile vibrations.

Perform a test which will detect the source of the movement that the device detects, eg; sources of wind such as air conditioner, an open window or a fan, movements of baby mobile (which can vibrate even if it’s not turned on) walking around the bed area or an intercom placed near the bed with intense transmission levels. Eliminate sources of wind, remove the mobile etc. After neutralising all environmental interruptions, perform the test again.

Q: Can I use the Babysense7 on my 13-month-old infant?
A: Babysense7 is intended for healthy newborn infants from birth and up to 1 year of age.
Babysense7 is set to recognise a defined breathing movement rate of infants within this age group (the alarm sounds if breathing stops for 20 seconds or if the breathing rate slows to below 10 breaths per minute).

Q. Can I use Babysense7 if my infant needs constant medical supervision?
A. No. You should contact your GP or medical specialist and seek their advice on what alternative suitable methods of monitoring your infant are available.

Q. Why is it recommended that only one pad be used in a bassinett?
A: The Babysense7 detects the movement produced by a baby’s breathing. A newborn, being smaller, may not have as much movement than a 3 or 4-month-old baby, and when two sensor pads are connected it does reduce the sensitivity of the pads, a little, no problem for an older baby but maybe a little more difficult to detect the movement for a new born baby. This is why it is always best to follow the instructions in the user guide including performing a regular (daily) test of the monitor.
Babysense7 is intended for use as an Infant Apnoea Alarm.
ALWAYS READ THE LABEL AND USER GUIDE, USE ONLY AS DIRECTED.